Pages
▼
Thursday, May 31, 2018
Inspiration Post at Stamps and Stencils
Here is a sneak peek at something I have made for my Inspiration Post over at Stamps and Stencils. Check it out by clicking HERE.
Wednesday, May 23, 2018
Lace Journal Cover
It is time for the new challenge at Frilly and Funkie and Autumn, who is our hostess is calling it Layers of Lace.
Lace, oh so lovely lace! Whether you add delicate layers of fine lace, or tattered and torn crocheted lace, we'd love to see you add dimension and depth to your vintage or shabby chic project with lace. Perhaps you have a favorite lace stamp or will choose to lace something up, we'd love to see your creations inspired by this topic.
I was walking around the dollar store a couple weeks ago and found an inexpensive journal - nothing is ever a dollar anymore so I hesitate to call it cheap. It is in a 5 1/2" x 8 1/2" format and I immediately knew I could make a removable cover for it with lots of lace.
I knew I wanted a sturdy fabric for the actual cover and found some canvas that I had picked up at the local art supply store in my sewing cupboard. It tears both ways so I tore a piece 4 1/4" wider than my journal when it was opened fully and 3/4" taller. Then I folded each side in 2" and used gel medium to glue the folded parts down at the top and bottom making sure to stay within 1/4" of the outside edges. Now I have pockets for the journal cover to slide into and when the journal is full, I can easily replace it with a new one.
I wasn't sure if it would stay closed once it was done so I decided to add some seam binding across the centre of the outside so I would have something to tie it closed.
The next step was to add all the lace to the outside. I knew I didn't want all white on this cover so I started with some cream laces on the top and bottom that came from my stash and then I added a wide strip of very fine lace across the middle that came from my late Mother-in-Law's sewing stash. I had to take it apart because she had started to sew it together in a v-shape perhaps to add to the neckline of a blouse since she made all her own clothes and did so without a pattern. Then I added strips of different white laces, all of which came from The Funkie Junkie Boutique.
Then it was time to embellish the front cover. I did not add embellishments to the back cover so that it would lie flat on the desk. The first thing I did was print a vintage image of Lily Elise on the computer and die cut it with a die called Fleur de Lis Squares (Spellbinders). I inked the edges with Spun Sugar and Vintage Photo Distress Ink (Tim Holtz) and then added it to the cover with dimensional foam.
Another flower was made from card stock. I die cut a couple of petals from the Shabby Posies die (Tammy Tutterow) and inked it with Spun Sugar and Vintage Photo DI. Then I shaped it and glued the two petals together with a button for the centre. I also painted a wee bit of white Gesso on the petals. When I added it to the cover, I tucked a couple of loops of pearl string underneath.
Next I created a flower from pleated ribbon by gluing it in concentric circles with my glue gun onto a card stock circle. I found a resin flower in my stash that was perfect for the centre and added it with some dimensional foam.
I always hang on to the tiniest bits of lace so to make this lace flower I just gathered a little strip of lace with a running stitch and glued it to a card stock circle. Then I snipped the edges away from three pieces of another lace pattern and glued them into the centre. I added a pearl embellishment to the centre.
I added a bit of crochet ribbon topped with a lace applique and a flower from my stash that was already a nice shade of pink and I just painted it with a wee bit of white Gesso before I dded a button centre.
Under the focal image are a couple more flowers from my stash that were ivory and I inked them with some of the Spun Sugar and Vintge Photo DI before I added the Gesso and buttons. I also cut a white fabric daisy in half and tucked it under the image. I made a loopy bow from white twine and tucked that under the ribbon flower.
The crochet flower came from my Mother-in Law's stash and I added a pearl brad for the centre. Under that I added a strip of burlap and more buttons.
This was a very easy project to make and I think it is very romantic. I hope you will share a lace project with us. One randomly chosen winner will receive a gift certificate to go shopping at The Funkie Junkie Boutique - FUN!! The Design Team will choose their top picks and the overall top pick will have the opportunity to Guest design with us.
Wednesday, May 9, 2018
Surf's Up
The new challenge starts today at Frilly and Funkie. Kathy is our hostess and calls it Surf's Up. She describes it this way:
Who's ready for a little sand, a little sun, a little surf? Let's take a little stroll beside the shore and create a vintage or shabby chic project with a beachy theme. Use ocean colors or beach images to add a fun seaside feel to your project.
When I started to think about what I was going to make for this challenge, I had lots of great ideas running around in my brain and then fate stepped in and changed the course of my creating when I stood up from my desk and heard the worst crunching sound from my knee and I almost landed on the floor. I have spent a lot of time playing couch potato with my leg elevated and an ice pack on my knee. Unfortunately this has prevented me from spending much time at my desk so I had to come up with a plan I could execute in short bursts and it also meant no process photos along the way. I am improving and I am really, really bored although I have managed to read a few books and get caught up on some TV so I guess it isn't all bad.
Anyway, back to my card. I started with some white card stock (Staples) for the blank and then added a distressed panel of patterned paper from a pad called Voyage Beneath the Sea (Graphic 45) that was inked with Frayed Burlap Distress Ink (Tim Holtz).
Next I cut a panel of white corrugated cardboard (The Funkie Junkie Boutique) and inked it with some Abandoned Coral Distress Ink (Tim Holtz).
Two tags came next. The first one is cut from a pad called St. Tropez (Prima) and the other one is cut from the fabric paper that I made for my Saturday Showcase that you can find HERE. Both tags are topped with some burlap ribbon that I split in half lengthwise so it would be a little more frayed.
When I thought about how to embellish my card, I decided to add beach-themed icons. First, I tied a little net from some twine and added it to the fabric paper tag. Then I found some word art on my computer that I created a few years ago so I printed that, distressed the edges and inked it with Antique Linen Distress Oxide (Tim Holtz).
The sunglasses is actually a button that I altered by cutting the shank off and then inking the frame with Terracotta Alcohol Ink (Tim Holtz) and then rubbing with some Rich Copper Wax Paste (Prima).
The starfish is made from Crafter's Clay (Martha Stewart) and a silicone mould (Wilton) and then it was coloured with Rusty Hinge Distress Ink (Tim Holtz) and a bit of Terracotta Alcohol Ink. I used a White Pen (Stigno) to highlight the bumps on the starfish.
The flip flops are clip art that I coloured with Antique Linen and Frayed Burlap Distress Oxide (Tim Holtz) using a water pen. The umbrella is also clip art that I coloured with pencil crayons (Prismacolors) blended with OMS (Gotrick) and added a wooden skewer for the
I used the Shabby Posies die (Tammy Tutterow) to cut the "Hibiscus" from a scrap of card stock and then coloured it with Abandoned Coral and Picked Raspberry Distress Oxides (Tim Holtz) before I added the stamens, which were also coloured with Picked Raspberry DO. If you are wondering why this flower, well I Googled "Flowers at the Beach" and this is what came up so I went with it - Google is such a great resource. Finally, I added a miniature shell that I found in my shell.
Given my current physical state, I think sitting on a lounge chair at the beach would be more fun than hanging out on my couch and thinking about all the tasks/chores I should be doing.
Thursday, May 3, 2018
Faking It
It is time for the next challenge at Stamps and Stencils. Toni is our hostess for this one and she calls it Let's Fake It! Here is what she has to say about it:
I love faux finishes of all descriptions whether it be rust, stone, leather or time worn vintage. You name it we have the power to fake it! I'd like to see your projects that include at least one faux finish. Produce anything you like but please include some stamping or stenciling or both if your heart desires!
I decided to make a steampunk inspired canvas with lots of faux rust.
I started with a 7" x 9" stretched canvas that I picked up at the dollar store and covered it with torn strips of old book paper that I glued on with Mod Podge to give it some strength. Next I used some Molding Paste (Golden) through a stencil called Measured (Tim Holtz) to add some texture. The whole canvas was given a coat of white Gesso (Liquitex) before it was given some colour.
The canvas was painted with Honey Brown Acrylic Paint (DecoArt) and then a coat of Mocha Mousse Chalk Acrylic (Paper Artsy), which was randomly wiped back with a baby wipe while it was still wet.
To give the canvas some life I used a sponge to add a variety of acrylic paints - Espresso (Craftsmart), Pure Black (Folk Art), Rich Espresso and Worn Penny Metallic (Deco Art) and then I added spray inks - Moonshadow Mist Burnished Brass (Lindys) and Gathered Twigs Distress Spray Stain (Tim Holtz).
Using some Jet Black Archival Ink (Ranger) I some markings with stamps - Border Lines (Seth Apter), Limor's Circles and Tasty Textures (IndigoBlu).
I made a background panel next by adding paper backed adhesive metal foil tape (Cantech) to a piece of light chipboard and then ran it through a Blueprint Texture Fade (Tim Holtz). Before I cut it down to size I used an embossing stylus to add more markings.
The next step was to paint it completely with Pure Black Acrylic Paint (Folk Art) and then wipe off the paint from the raised areas.
The metal panel was given a rusty tone by covering it with alcohol inks - Rust, Terra Cotta, Pitch Black and Copper Mixative (Tim Holtz). Some blending solution was added on the felt applicator to make the colours flow and blend more easily.
I stamped the focal image from a set called Steampunkesque (IndigoBlu) onto a scrap of white card stock using Jet Black Archival Ink (Ranger).
The image was inked all over with Vintage Photo Distress Ink (Tim Holtz) and then coated with Clear Rock Candy Distress Crackle Paint.
My husband cut some wooden gears for me on the laser cutter and to turn them into grungy rusted gears I first coated them with a mixture of Regular Matte Gel (Golden) mixed with some sand (borrowed from the playground).
Next the gears were painted with Payenes Grey Fuid Acrylic (DecoArt Media). After this was dry I sponged on bits of Quinacridone Gold Fluid Acrylic (DecoArt Media) and Worn Penny Metallic Arcylic (DecoArt) and ojnce I was happy with the combination, I coated them with Ultra Matte Varnish (DecoArt Media). The photo I took of this step was so blurry that no amount of edit would make it visible - my apologies.
I collected a bunch of other metal bits and pieces (Tim Holtz and My Husband's Workshop) to add to the canvas and altered them with a combination of Rust, Espresso and Copper Mixative Alcohol Ink (Tim Holtz).
To assemble the canvas I used some Soft Matte Gel (Golden) to attach the metal panel first, followed by the focal image and then the gears and bits and pieces adding a couple of buttons and a funky bead from my stash to round out the embellishments.
I hope you will create something faux and join us for this challenge.