Pages
▼
Saturday, March 6, 2021
Saturday Showcase for The Funkie Junkie Boutique Blog
Today the whole team at The Funkie Junkie Boutique Blog is sharing the Saturday Showcase post. We have decided to make Artist Trading Cards (ATCs) for fun and swap them amongst us rather than stashing them in a box and forgetting about them.
I am featuring Graphic 45 papers to make my shabby ATCs and while I have used paper collections I have had for some time and they may not be available anymore, I encourage you to go to the shop and check out all the paper collections to be had because there are so many that would work if you want to recreate my ATCs.
An ATC is 2 1/2" x 3 1/2" and can be made from chipboard, heavy card stock, watercolor card stock or even playing cards. The chipboard pieces I used were cut by my husband and I started by covering them with patterned paper but I did not like where they were going so I peeled off the paper. When I did that some of the chipboard peeled off too leaving a bumpy surface. I added a very thin layer of texture paste smoothing it with an old credit card but after they dried the surface was still bumpy. Right then I decided that I didn't mind the texture, especially since I planned to add more texture.
I covered both sides of the ATCs with White Gesso and then added torn pieces from an old book but you could add any paper as your collage items. I dry brushed a bit more White Gesso over the book paper.
The next step was to add some texture paste on both sides through the Flourish stencil (Tim Holtz).
I added a little bit of water to some Sand Acrylic Paint (Dina Wakley) and covered the ATC on both sides.
The next step was to create embellishments for the ATCs and there are no process photos since it just involved cutting and punching but you can see them all in these close-ups. Everything was inked on the edges with Gathered Twigs Distress Ink. I made computer generated sentiments, hand-cut hearts and little tags. punched flowers and butterflies and my husband cut some honeycomb pieces out of cracker box material for me. Little bows made from Burlap String, pieces of lace and dollar store adhesive pearls for the flower centres were added to finish the ATCs off.
Pop over to The Funkie Junkie Boutique Blog where you will find the treasures created by my teammies for this Saturday Showcase. You will want to go on to each of their blogs to get the details on how they created their tiny works of art.
If you want to participate in the challenge, it can be founbd HERE and runs until 11:55 pm on Tuesday, March 16th. You can create anything but make sure it is either shabby chic or vintage.
Supplies list:
Stampers Anonymous Tim Holtz Layering Stencils - Flourish THS032
Ranger Tim Holtz Distress Ink Pad - Gathered Twigs TIM32823
Dina Wakley Heavy Body Acrylic Paint - Sand - 1oz Bottle
Burlap String - 12 Colors
Scor Tape
Ranger Inkssentials Mini Ink Blending Tool - With 4 Blending Foams IBT40965
Graphic 45 Paper Pads - A Ladies Diary, Bloom, Fairie Dust and Floral Shoppe
Liquitex White Gesso
Chipboard
Liquitex Regular Modeling Paste
EK Success Flower Punches
Martha Stewart Butterfly Punch
Dollarama Adhesive Pearls
Lace
Wednesday, March 3, 2021
Steampunk Professor
It is tima again for a new challenge at The Funkie Junkie Boutique Blog and this time it is an easy one - Anything Goes.
We are going with an 'Anything Goes' theme for this challenge and are looking forward to seeing your vintage/shabby chic projects.
I thought it might be fun to go Steampunk this time and use stamps from the Tim Holtz Professor set. This set seems to have left the shop but the main image can be found on the Professor 2 set, which is available.
I got going on this and completely forgot to take any process photos - blame it on Covid confinement and my brain turning to mush. Here is how it came together:
- I started with an 8" square canvas panel that I covered with White Gesso. For this one I added an open wooden frame to the back. I thought this could provide a way to hang to canvas panel although I usually just suggest 3M Command Velcro holders, which work really well. They tuck the canvas panel against the wall while the added frame will allow the panel to sit away from the wall.
- The next step was to paint the whole canvas with Buff Acrylic Paint (Dina Wakley).
- The Professor and three other images from the stamp set were stamped with Jet Black Archival Ink (Ranger) on tissue paper and then glued to the canvas.
- I used Jet Black Archival Ink to add some stenciling with a stencil called Measured (Tim Holtz) and some Texture Paste to add dimension through a stencil called Blocks Small (Dylusions).
- At this point I decided that the buff paint was lighter than what I wanted so I sprayed the whole canvas with Gathered Twigs Distress Spray Stain (Tim Holtz).
- I did the assemblage part of this in a backwards way because I had intended the canvas to be light and the bits and pieces to be dark so it took way longer and was really messy. Since I have a mixture of metal and wooden pieces, I gave everything a coat of White Gesso and then followed that with a coat of Iced Coffee paint. I should have glued everything in place after the Gesso was applied and before I sprayed the canvas with the ink because then I wouldn't have had to add the Iced Coffee paint but I wasn't thinking that day - or many others right now to be honest.
- After the Iced Coffee paint was dry, it still wasn't dark enough so I added some watered down Umber Acrylic Paint (Dina Wakley).
- Next I glued all the pieces to the canvas - there are gears, screws, washers, charms, buttons and all sorts of electrnoic bits - and then touched up any light spots with the Umber paint. If I had Gathered Twigs Distress Paint, I would have used that and then topped it with the Umber paint.
- The next step was to make all the bits look somewhat rusty. To accomplish that I rubbed a variety of wax pastes on with my fingers - Matte Wax Paste in Patina Green, Rusty Brown and Rusty Red (Prima) and Oxynite and Rose Quartz Treasure Gold Metallic Paste (Connoisseur Studios). I used a soft cloth to buff them and just kept adding the pastes until I got a look I was happy with. You will notice when you go to the shop that there are not many colours of Matte Wax showing right now but check out the March Pre-Order section and scroll down where you will find a number of luscious new colours available to order.
- After I was done with the pastes I decided the background was a bit plain so I masked the bits and pieces off and sprayed and dripped some Tarnished Brass Distress Spray Stain (Tim Holtz) over the background.
I had fun making my Steampunk canvas and hope it will inspire you to join us for the Anything Goes challenge. The challenge can be found HERE and runs until 11:55 pm EST on Tuesday, March 16th.
Supplies list:
Stampers Anonymous Tim Holtz Stamp Set - The Professor 2 CMS395
Stampers Anonymous Tim Holtz Layering Stencils - Measured THS012
Ranger Tim Holtz Distress Spray Stain - Gathered Twigs TSS42310
Ranger Tim Holtz Distress Spray Stain - Tarnished Brass TSS42549
Dina Wakley Media Acrylic Paint - Umber, 1 oz Bottle
Prima Marketing Matte Wax Pastes - Rusty Red, Rusty Brown, Green Patine
Silver and Bronze Tone Key Set
Ranger Jet Black Archival Ink
Connoiseur Studios Treasure Gold Wax Pastes - Rose Quartz, Oxynite
Dina Wakley Buff Acrylic Paint
Dylusions Blocks Small Stencil
White Gesso
Wooden Gears, Steampunk Buttons, Hardware and Electronic Parts, Charms