I'm Back!!

Hi there,

Have you have wondered what happened to me? No, I did not fall off the face of the earth and I have been feeling just fine albeit tired of this pandemic as I am sure most of you are too.

My post back in March for The Funkie Junkie Boutique Blog was my last one as a Design Team member for them since I chose not to continue on after 13 years. In the time since that last post I came to realize just how much work editing photos was so I took a long break from my blog. I have been creating though and I think it is time to start sharing what I have been up to. I won't go into a lot of details for each project since I have purposely not taken a pile of photos but will give you a little synopsis of each project.

The project I am showing you today is a mixed media art book about leaves and was inspired by an online course I took from Roxanne Evans Stout. It is about 5" x 7" and each of the seven double-sided pages features a different leaf and lots of texture, collage, paint and stenciling.

I will be back with more of my latest creations so stay tuned.

Saturday Showcase for The Funkie Junkie Boutique Blog

Today the whole team at The Funkie Junkie Boutique Blog is sharing the Saturday Showcase post.  We have decided to make Artist Trading Cards (ATCs) for fun and swap them amongst us rather than stashing them in a box and forgetting about them.

I am featuring Graphic 45 papers to make my shabby ATCs and while I have used paper collections I have had for some time and they may not be available anymore, I encourage you to go to the shop and check out all the paper collections to be had because there are so many that would work if you want to recreate my ATCs.

An ATC is 2 1/2" x 3 1/2" and can be made from chipboard, heavy card stock, watercolor card stock or even playing cards. The chipboard pieces I used were cut by my husband and I started by covering them with patterned paper but I did not like where they were going so I peeled off the paper. When I did that some of the chipboard peeled off too leaving a bumpy surface. I added a very thin layer of texture paste smoothing it with an old credit card but after they dried the surface was still bumpy. Right then I decided that I didn't mind the texture, especially since I planned to add more texture.

I covered both sides of the ATCs with White Gesso and then added torn pieces from an old book but you could add any paper as your collage items. I dry brushed a bit more White Gesso over the book paper.

The next step was to add some texture paste on both sides through the Flourish stencil (Tim Holtz).

I added a little bit of water to some Sand Acrylic Paint (Dina Wakley) and covered the ATC on both sides.

The next step was to create embellishments for the ATCs and there are no process photos since it just involved cutting and punching but you can see them all in these close-ups. Everything was inked on the edges with Gathered Twigs Distress Ink. I made computer generated sentiments, hand-cut hearts and little tags. punched flowers and butterflies and my husband cut some honeycomb pieces out of cracker box material for me. Little bows made from Burlap String, pieces of lace and dollar store adhesive pearls for the flower centres were added to finish the ATCs off.

Pop over to The Funkie Junkie Boutique Blog where you will find the treasures created by my teammies for this Saturday Showcase. You will want to go on to each of their blogs to get the details on how they created their tiny works of art.

If you want to participate in the challenge, it can be founbd HERE and runs until 11:55 pm on Tuesday, March 16th. You can create anything but make sure it is either shabby chic or vintage.
Supplies list:

Stampers Anonymous Tim Holtz Layering Stencils - Flourish THS032
Ranger Tim Holtz Distress Ink Pad - Gathered Twigs TIM32823
Dina Wakley Heavy Body Acrylic Paint - Sand - 1oz Bottle
Burlap String - 12 Colors
Scor Tape
Ranger Inkssentials Mini Ink Blending Tool - With 4 Blending Foams IBT40965
Graphic 45 Paper Pads - A Ladies Diary, Bloom, Fairie Dust and Floral Shoppe
Liquitex White Gesso
Chipboard
Liquitex Regular Modeling Paste
EK Success Flower Punches
Martha Stewart Butterfly Punch
Dollarama Adhesive Pearls
Lace

Steampunk Professor

It is tima again for a new challenge at The Funkie Junkie Boutique Blog and this time it is an easy one - Anything Goes.

We are going with an 'Anything Goes' theme for this challenge and are looking forward to seeing your vintage/shabby chic projects.

I thought it might be fun to go Steampunk this time and use stamps from the Tim Holtz Professor set. This set seems to have left the shop but the main image can be found on the Professor 2 set, which is available.

I got going on this and completely forgot to take any process photos - blame it on Covid confinement and my brain turning to mush. Here is how it came together:

- I started with an 8" square canvas panel that I covered with White Gesso. For this one I added an open wooden frame to the back. I thought this could provide a way to hang to canvas panel although I usually just suggest 3M Command Velcro holders, which work really well. They tuck the canvas panel against the wall while the added frame will allow the panel to sit away from the wall.

- The next step was to paint the whole canvas with Buff Acrylic Paint (Dina Wakley).

- The Professor and three other images from the stamp set were stamped with Jet Black Archival Ink (Ranger) on tissue paper and then glued to the canvas.

- I used Jet Black Archival Ink to add some stenciling with a stencil called Measured (Tim Holtz) and some Texture Paste to add dimension through a stencil called Blocks Small (Dylusions).

- At this point I decided that the buff paint was lighter than what I wanted so I sprayed the whole canvas with Gathered Twigs Distress Spray Stain (Tim Holtz).

- I did the assemblage part of this in a backwards way because I had intended the canvas to be light and the bits and pieces to be dark so it took way longer and was really messy. Since I have a mixture of metal and wooden pieces, I gave everything a coat of White Gesso and then followed that with a coat of Iced Coffee paint. I should have glued everything in place after the Gesso was applied and before I sprayed the canvas with the ink because then I wouldn't have had to add the Iced Coffee paint but I wasn't thinking that day - or many others right now to be honest.

- After the Iced Coffee paint was dry, it still wasn't dark enough so I added some watered down Umber Acrylic Paint (Dina Wakley).

- Next I glued all the pieces to the canvas - there are gears, screws, washers, charms, buttons and all sorts of electrnoic bits - and then touched up any light spots with the Umber paint. If I had Gathered Twigs Distress Paint, I would have used that and then topped it with the Umber paint.

- The next step was to make all the bits look somewhat rusty. To accomplish that I rubbed a variety of wax pastes on with my fingers - Matte Wax Paste in Patina Green, Rusty Brown and Rusty Red (Prima) and Oxynite and Rose Quartz Treasure Gold Metallic Paste (Connoisseur Studios). I used a soft cloth to buff them and just kept adding the pastes until I got a look I was happy with. You will notice when you go to the shop that there are not many colours of Matte Wax showing right now but check out the March Pre-Order section and scroll down where you will find a number of luscious new colours available to order.

- After I was done with the pastes I decided the background was a bit plain so I masked the bits and pieces off and sprayed and dripped some Tarnished Brass Distress Spray Stain (Tim Holtz) over the background.

I had fun making my Steampunk canvas and hope it will inspire you to join us for the Anything Goes challenge. The challenge can be found HERE and runs until 11:55 pm EST on Tuesday, March 16th.

Supplies list:

Stampers Anonymous Tim Holtz Stamp Set - The Professor 2 CMS395
Stampers Anonymous Tim Holtz Layering Stencils - Measured THS012
Ranger Tim Holtz Distress Spray Stain - Gathered Twigs TSS42310
Ranger Tim Holtz Distress Spray Stain - Tarnished Brass TSS42549
Dina Wakley Media Acrylic Paint - Umber, 1 oz Bottle
Prima Marketing Matte Wax Pastes - Rusty Red, Rusty Brown, Green Patine
Silver and Bronze Tone Key Set
Ranger Jet Black Archival Ink
Connoiseur Studios Treasure Gold Wax Pastes - Rose Quartz, Oxynite
Dina Wakley Buff Acrylic Paint
Dylusions Blocks Small Stencil
White Gesso
Wooden Gears, Steampunk Buttons, Hardware and Electronic Parts, Charms

Tiny Neutral Accordion Book

The new challenge starts today at The Funkie Junkie Boutique Blog and Sara Emily is our hostess for this one. She is calling it Mostly Neutral and she describes it this way:

For this challenge, I would like you to use mainly neutrals, but I will allow you one accent color or use of metallic accents. Let's see how you use beige, ivory, taupe, brown, black, gray or shades of white or any combination of these to make any vintage/shabby chic project you would like.

I thought it might be fun to make a really tiny accordion book and use all sorts of bits and pieces from my stash. In truth I was inspired by a new button and elastic closure that I saw online and wanted to make it so I needed a book for it.

Since there are so many pages I am not going to show a step by step but will give you an idea of the products and techniques used to put it together. I started with the accordion base and cut two pieces 3 7/8" x 12" and then scored it on the long side at 2 7/8", 5 3/4", 8 5/8" and 11 1/2". I cut away the 1/2" leftover piece on one of the strips and angled the ends of the 1/2" leftover piece on the other strip. I glued the 1/2" strip to one side of the other strip and then folded the resulting long strip into mountain and valley folds - you should end up with the panels on each end going the same direction. If you want a larger book, you can add another strip.

Next I created the covers by cutting two pieces of cracker box material 4" x 9" and then scored them on the long side at 3" and 6". I folded one side to the front of the centre and the other to the back of the centre and then glued each in place so that I ended up with a piece 3" x 4" that was three layers thick. One layer of thick chipboard, mat board or book board could be used instead but I like the idea of recycling the cracker boxes.

The next step was to add paper to one side of each cover. I cut the paper 4" x 5", centred the cover block on the wrong side of the paper and glued it on. The corners were mitered when I glued the excess to the back side to get nice sharp corners. Glue the covers to the accordion base on the panels at each end that face the same direction making sure to centre the panel on the back side of the cover.

Now it was time to make the panels that would be decorated. Since I wanted to use some wet media, I cut pieces of water colour card 2 3/4" x 3 3/4" and then I distressed the edges with a pair of scissors.

I had decided to use a nature theme for the book so I set about to decorate each page with that theme in mind. Each panel was inked with distress inks or painted with watered down paints or Scribble Sticks and then collaged with bits of paper, laces, fibers, die cuts, charms (altered with Alcohol Ink), stamped bits, some Chit-chat stickers and stenciling with ink and texture paste.re are some close-ups to give you an idea of what I did on each page.

Once each panel (as shown in these close-ups was decorated, they were glued onto the accordion base. I decided which order I wanted them to go in and mounted the flattest ones first on each side and then mounted ones with more dimension.

Finally I decorated the covers starting with the front as shown at the top and then the back as shown above.

Once the book was all put together I determined the thickness and made the closure by taking thin round elastic cord and wrapping it around the book twice. Once I determined the length I cut it off the spool and folded it in half. The open ends were threaded through the button holes and tied together. The closure was wrapped around the book and looped over the button. This is a super easy closure and will stretch a bit to accommodate thicker embellishments without detracting from your cover design. The button can be a design element in itself as was this leaf button I used.

I hope you will join us for this challenge. The Design Team will choose their top four picks with the overall winner receiving a gift certificate to shop at The Funkie Junkie Boutique. All four will receive badges to display on their blogs. The challenge runs until 11:55 pm EST on Tuesday, March 2nd.

Supplies list:

Tim Holtz Distress Inks - Gathered Twigs, Frayed Burlap, Walnut Stain, Pumice Stone, Black Soot
Tim Holtz Distress Oxides - Hickory Smoke, Pumice Stone
Dina Wakley Scribble Sticks - Umber, Sand
Tim Holtz Alcohol Inks - Pitch Black, Rust, Mushroom, Blending Solution
Tim Holtz Distress Crayons - Antique Linen
Tim Holtz Bubble Stencil
Wendy Vecchi Dots and Stripes Border Stencil
TCW Stencils - Mini Tiny Circles, Mini Geometric Art Layers
Stampers Anonymous Tim Holtz Rubber Stamps - Entomology
Stampers Anonymous Tim Holtz Rubber Stamps - Nature's Wonder
Wendy Vecchi Country Flowers Stamp Set
Tim Holtz Thinlets Dies - Entomology, Garden Greens, Wildflower Stems #2 Sizzix Circle Die Set
Tim Holtz Idea-ology - Kraft Glassine, Chit-chat Stickers
Stamperia Alchemy Paper Pad
Graphic 45 Mon Amour Paper Pad
Miscellaneous - Charms, Burlap String, Burlap, Ric-rac, Wool, Lace, Button, Cardboard, Cork, Skeleton Leaf, Feather, Embroidery Floss, Fabric Scraps
Recollections Black Card stock
Canson Watercolour Card Stock
Elastic Cord
Scor Tape
Liquitex Modeling Paste
Ranger Jet Black Archival Ink

Love in My Heart

It is time for the new challenge at The Funkie Junkie Boutique Blog and Suzz, our hostess for this one is calling it Groundhog Day. Don't let the title put you off because when you read her description you will realize that it is really quite simple and something anyone can accomplish with no problem.

"This challenge is inspired by the movie Groundhog Day. In the movie Bill Murray is forced to repeat the same day over and over again for 10 years. This past year has been a little challenging and people have felt like they might be in a little bit of a Groundhog Day time loop. I am challenging you to create a shabby chic or vintage project that uses a technique, stamp, ink, or any other consistent tool that you find yourself using over an over in your art. Think of this as your opportunity to share what you find yourself repeating in your art frequently. Be sure to share with us in your post what it is that you keep repeating in your art"

Since Valentine Day is fast approaching, I thought I would make a little canvas and use one of the canvas boards that my Grandchildren gave me for Christmas. I really should have made a card for my husband so now I will be scrambling. Here is how this little canvas comes together:

• Use a wet glue such as Mod Podge to adhere tissue paper that has been wadded into a ball and then carefully opened up again to the top of a 5" x 7" flat canvas board - this is my repetitive element since it is a great way to make instant texture

Reminder: Just pat it down to adhere and don't rub it because it will tear when it is wet from the glue

• Cut the corners off the tissue off on the diagonal and then glue the overhang to the back of the canvas board making sure to create sharp corners

• Glue a panel of Botanical Collage Paper to the canvas board
• Dry brush some White Gesso over the canvas board

• Use the Bubble Stencil and texture paste to add random texture on the panel - this is another go-to element in my mixed media projects 
• Decorate the unprinted side of hearts that have been cut from cracker boxes - these were laser cut for me by my husband but if you have a heart die, the cracker box material will go through your die-cutting machine

1. Ink with Watering Can Archival Ink and then stencil with a Speckles stencil and some Picket Fence Distress Ink

2. Layer 3 hearts together, paint with Titanium White Acrylic Paint aptting it to give it some texture and then add some heart shapes punched from card stock and paper scraps 

3. Cover with computer generated paper (create in word processing program with a variety of fonts)

4. Ink with Watering Can Archival Ink and then stamp with a criss cross stamp using Jet Black Archival Ink 

5. Cover with patterned paper scrap

• Stamp the word love on a scrap of card stock using Red Geranium Archival Ink and ink the edges with Watering Can Archival Ink 
• Ink the edges of a Quote Chip with Watering Can Archival Ink 
• To assemble the canvas, add some loopy lengths of white thread followed by the hearts, sentiments and finally a few red sequins

I hope you will join us for the challenge, which runs until 11:55pm EST on Tuesday, February 16th. The Design Team will choose their 4 top picks with the overall winner receiving a gift certificate to shop at The Funkie Junkie Boutique.

Supplies list:

Stampers Anonymous Tim Holtz Layering Stencils - Bubble THS002
Stampers Anonymous Tim Holtz Layering Stencils - Speckles THS021
Ranger Tim Holtz Distress Ink Pad - Picket Fence TIM40781
Prima Art Alchemy Liquid Acrylic Paint - Titanium White
Ranger Inkssentials Mini Ink Blending Tool - With 4 Blending Foams IBT40965
Tim Holtz Botanical Collage Wrap
Tim Holtz Quote Chips
Tim Holtz Stamps #THMM01
Wendy Vecchi Archival Ink - Watering Cab, Red Geranium
Ranger Jet Black Archival Ink
Graphic 45 Mon Amour 6"x6" Paper Pad
White Gesso
Texture Paste
Thread
Dollarama Tissue Paper, Heart Punch, Sequins
Martha Stewart Heart Border Punch
Studio G Alphabet Stamp Set

Hexagonal Needle Books

It is time for the new challenge at The Funkie Junkie Boutique Blog.  Jenny is our hostess for this one and is calling it So Delicate!  Here is how she describes it:

Although it's not always evident in my projects, I have a real passion for delicate laces, fragile flowers, fine stitching, intricate artwork and exquisite architecture. For this challenge create something delicate or a vintage/shabby chic project that features delicate things in it.

I think I might be going a little rogue with my offering for this one because my projects are not as delicate as they probably should be. I was tidying up my fabric cupboard and told myself that I better get a move on and use some of it up because there are lots of leftovers from past projects that I haven't really touched for a few years. I even have t-shirt fabric from when I made clothes for my daughter when she was little and it is now decades old.

I chose three that I thought I could feature, convinced my husband to cut me some hexagons out of cracker boxes to use as templates and started cutting. These are no sew projects so everything is put together with PVA glue, which made them really easy to construct.

Template sizes measured from one flat edge to the opposite flat edge:

Fabric - 5 1/8"
Cardboard Base and Quilt Batting - 4 3/8"
Felt Liner - 4 1/4"
Flannelette Pages - 4"

Tip: To draw on the fabric I used a Pilot Frixion gel rollerball pen because it is erasable by just running an iron over the fabric and works beautifully.

Here is how to create these heaxagon needle books:

• Use the fabric template to cut two each of the three fabrics
• Use the second largest template to cut two cardboard hexagons and two from low loft quilt batting for each needle book
• Glue a piece of quilt batting to one side of each cardboard piece
• Centre the batting side of the cardboard bases over the wrong side of each fabric piece

• Turn the fabric over the edges and glue - do one edge and then the opposite edge making sure to gently pull to ensure that the right side is smooth - continue until all six sides are turned

• Cut 2" x 5" rectangles of each fabric, press 1/4" hem on the short edges in and then fold in half and press to create hinged "spines" for the book
• Centre the hinges over the inside of the book leaving a gap between the font and back cover - I left 1/8" but 1/4" would have been better
• Glue the the sides of the hinges to the inside of the covers

• Use Distress Ink to dye seam binding to match the fabric
• Glue a piece of seam binding on each side of the cardboard to act as closures

• Cut pieces of felt to cover the inside of each cover and glue in place - they should be slightly smaller so they don't show when the book is closed (shown on right side in photo above)
• Use regular scissors and pinking sheers to cut a couple of pieces of flannelette for each book (shown on left side in photo above)
• Glue the pages on top of the felt with the straight edge against the felt edge that is next to the "spine"

• Cover the glued edge of the flannel with a tiny strip of lace
• Decorate the front of each book

Note: I used a number of items in my stash to decorate the books that came from The Funkie Junkie Boutique but may not be available now because of the recent sales or because they have been discontinued. Like the fabric, I decided it was time to use some of these things up because if I make space, I can buy more - just saying. :)

Red Book:

• Cover a filigree medallion with Ocean Acrylic Paint (Dina Wakley) and add some red gems
• Paint a wooden star with Lemon Acrylic Paint (Dina Wakley) and add a large red gem
• Add the star to the centre of the medallion
• Glue the medallion to the centre of the book front

Pink Floral Book:

• Cover two filigree leaves with White Gesso
• Heat emboss with Clear Embossing Powder
• Cut some pink leaf branches using the Garden Green Die Set (Tim Holtz), shape the petals and ink edges with Worn Lipstick Distress Ink (Tim Holtz)
• Layer a couple of paper flowers
• Adhere all the elements to the front of the book

Cream Book:

• Adhere a strip of Idea-ology Ruler Ribbon (Tim Holtz) across the front
• Use a flourish die (Spellbinders Venetian Motifs) and paper from Precious paper (Graphic 45) to cut two flourishes and adhere next
• Use ruffled ribbon (Melissa Frances) to create a flower, add a button to the centre and adhere
• Glue a scissors charm to the front cover

Supplies list:

Dina Wakley Paints - Ocean, Lemon
Tim Holtz Distress Inks - Spin Sugar, Worn Lipstick, Candied Apple
Bronze Scissor Charms - Set of 5
Antique Bronze Filigree Flower Wraps - set of 3
Bronze Leaf Embellishments - Set of 6
Rayon Seam Binding
VersaMark Watermark Ink Stamp Pad
Gems
Wooden Star
Tim Holtz Garden Greens Die Set
Tim Holtz Idea-ology Ruler Ribbon
Melissa Francess Ruffled Ribbon
Spellbinders Venetian Motifs Die Set
Button
Paper Flowers
White Gesso
Clear Embossing Powder
Lace scraps

Life is a Beautiful Ride

Today is the start of a new challenge at The Funkie Junkie Boutique Blog.  I am the hostess this time and am calling it Put A Good Word In!  Here is how I describe the challenge:

Create a shabby chic or vintage projects that includes a word or words that are positive or happy or uplifting in nature. Single words or sentiments/quotes can be used. Given what we have all been through for the last months nothing sad or negative please.

I was digging through some untouched ignored bins in my craft space and came across this resin bicycle that I bought on a visit to the US a few years ago and thought it was high time I used it. Then I set about trying to come up with some appropriate words to go with it. I found this sentiment online and it spoke volumes to me.

At any time in our life and especially in times like this it is so easy to think nothing is beautiful but even in the midst of all the problems and trials we experience there is something beautiful to latch on to. Right now it might be that we have become closer to our families because we are spending more time together or we can rejoice because our communities have stepped up in a big way to help each other and especially those that are alone. It might be that we can be thankful for all the technology that we have so we can stay connected or it might be something fun like having had the time to learn something new. It is true that the times are tough but life is still a beautiful ride even with obstacles.

I thought I would make a whimsical little canvas to showcase my bicycle. I used a variety of Dina Wakley acrylic paints along with scraps of paper from Graphic 45 and some dies from Tim Holtz and inks from Tim and Wendy Vecchi. Normally I would share my process with you but this time I am just giving you a sneak peek.  I am presenting the Saturday Showcase on January 9th where I will detail how I created it so save the date and check out the post on The Funkie Junkie Boutique Blog.